Home › Fault Codes › Dishwashers › Hotpoint › F06
F06

Water fill timeout

Hotpoint identifies F06 as a water-fill timeout.

What this code means

Hotpoint identifies F06 as a water-fill timeout.

Possible causes

  • Water supply off or low pressure
  • Fill hose restricted
  • Inlet filter or valve issue

Common symptoms

  • F06 displayed
  • Dishwasher does not fill sufficiently
  • Programme may stop

Checks to make

  1. Check the water supply is present and at adequate pressure
  2. Check the tap is fully open
  3. Check the fill hose is not restricted

Safety

  • Turn off the water supply before disconnecting the inlet hose.

Model notes

Hotpoint recommends service if the external water supply and hose are satisfactory.