Home › Fault Codes › Dishwashers › Hotpoint › F10
F10

Heating element fault

Hotpoint identifies F10 as a heating-element fault.

What this code means

Hotpoint identifies F10 as a heating-element fault.

Possible causes

  • Heating element failure
  • Heater wiring fault
  • Control or relay fault

Common symptoms

  • F10 displayed
  • Water may not heat
  • Drying or wash performance may be poor
  • Cycle may stop

Checks to make

  1. Power-cycle the dishwasher once
  2. Arrange engineer diagnosis if the code returns

Safety

  • Heating circuits operate at mains voltage. Internal diagnosis should be carried out by competent service personnel.

Model notes

Hotpoint recommends engineer attention.