FAULTNEST FAULT CODES
Samsung Dishwashers Fault Codes
Browse Samsung dishwashers fault and error codes, meanings, likely causes and diagnostic checks.
AVAILABLE CODES
Choose the fault code
14 published codes currently listed for this manufacturer and category.
Low-water-level check fault
The dishwasher detects an abnormal low-water-level condition and may repeatedly try to drain.
Wash motor operation fault
The dishwasher fills but does not begin normal spray/wash operation.
Dishwasher water supply fault
The dishwasher is not receiving the expected fresh-water supply.
Dishwasher drainage fault
The dishwasher has not detected the expected drop in water level during draining.
Drain pump operation fault
The dishwasher attempts to drain but the drain pump fails to start, runs briefly or stalls.
Button or key stuck
The control detects one or more buttons as continuously pressed.
Detergent dispenser motor fault
The dishwasher detects abnormal operation of the detergent-dispenser actuator or motor.
Abnormal or excessive supply voltage
The dishwasher has detected an abnormal mains-voltage condition and entered protection mode.
Door not detected as closed
The dishwasher control does not detect the door as correctly closed for operation.
Drying fan fault
The dishwasher has detected a problem with the drying fan system.
High temperature condition
The dishwasher has detected an abnormal high-temperature condition.
Leak detected
The dishwasher has detected water where it should not be and may run the drain pump continuously.
Overflow or excessive water condition
The dishwasher detects an overflow or abnormal water-level condition.
Temperature sensor fault
The dishwasher detects a temperature-sensing problem and may stop before or shortly after washing begins.
CAN'T FIND THE CODE?
Help us add it
Submit a missing Samsung code and we will review it before publishing.