FAULTNEST FAULT CODES
Hotpoint Washing Machines Fault Codes
Browse Hotpoint washing machines fault and error codes, meanings, likely causes and diagnostic checks.
AVAILABLE CODES
Choose the fault code
14 published codes currently listed for this manufacturer and category.
Electronic circuit board fault
Hotpoint identifies F01 as an electronic circuit board fault.
Motor circuit fault
Hotpoint identifies F02 as a motor-circuit fault that can cause intermittent or no drum rotation.
Temperature sensing fault
Hotpoint identifies F03 as a temperature-sensing fault.
Waste pipe blockage or pump issue
F05 indicates a drainage problem such as a blocked waste path or pump issue.
Door lock fault
F06 indicates a problem with the washing-machine door lock or door-closing system.
Electronic circuit board or heating circuit fault
Hotpoint associates F07 with an electronic circuit-board or heating-circuit fault.
Heater fault
Hotpoint identifies F08 as a heater-related fault.
Software fault
Hotpoint identifies F09 as a software or electronic-control fault.
Pump circuit fault
Hotpoint identifies F11 as a pump-circuit fault that can leave water in the drum.
Electronic control fault
Hotpoint identifies F12 as an electronic control fault that can prevent the machine from operating.
Dryer temperature sensing fault
On Hotpoint washer-dryers, F13 indicates a dryer temperature-sensing fault.
Heater control fault
F15 indicates a heater-control fault affecting washing or drying heat.
Drum lock position sensor fault
On applicable top-loading Hotpoint machines, F16 indicates that the drum has not stopped or locked in the correct position.
Internal data error
Hotpoint identifies F18 as an internal data or electronic-control error.
CAN'T FIND THE CODE?
Help us add it
Submit a missing Hotpoint code and we will review it before publishing.