FAULTNEST FAULT CODES
Samsung Electronics & Equipment Fault Codes
Browse Samsung electronics & equipment fault and error codes, meanings, likely causes and diagnostic checks.
AVAILABLE CODES
Choose the fault code
15 published codes currently listed for this manufacturer and category.
Microwave touch key held for too long
Samsung uses -SE- when a touch key has been detected as continuously pressed for too long.
Microwave touch-key communication fault
Samsung uses -tE- for an abnormal communication condition involving the touch-key controls.
Microwave touch-key communication fault
Samsung uses -TE- for an abnormal communication condition involving the touch-key controls.
Microwave temperature sensor open or short circuit
C-20 indicates that the microwave temperature sensor is open-circuit or short-circuit.
Microwave over-temperature condition
Samsung identifies C-21 as a high-temperature condition during microwave operation.
Damper position not detected
C-A1 appears when the microwave cannot detect the damper opening or closing within the expected time.
Touch key held for too long
C-d0 indicates that a microwave touch key has been pressed continuously for more than the expected time.
Main and sub control communication fault
C-F0 indicates loss of communication between the microwave's main and sub control processors.
Microwave touch-key communication fault
The microwave has detected abnormal communication involving the touch-key controls.
Microwave temperature sensor open or short circuit
The microwave has detected an open-circuit or short-circuit condition in the temperature-sensor system.
Microwave temperature sensor open or short circuit
The microwave has detected an open-circuit or short-circuit condition in the temperature-sensor system.
Microwave over-temperature condition
The microwave has detected temperature above the permitted limit during operation.
Main and sub controller communication fault
The microwave has lost communication between its main and sub MICOM controllers.
Microwave damper position not detected
The microwave has failed to detect the damper opening or closing within the expected time.
Microwave touch key held for too long
Samsung uses SE when a touch key has been detected as continuously pressed for too long.
CAN'T FIND THE CODE?
Help us add it
Submit a missing Samsung code and we will review it before publishing.