Home › Fault Codes › Washing Machines › Samsung

FAULTNEST FAULT CODES

Samsung Washing Machines Fault Codes

Browse Samsung washing machines fault and error codes, meanings, likely causes and diagnostic checks.

AVAILABLE CODES

Choose the fault code

16 published codes currently listed for this manufacturer and category.

1C

Water level sensor fault

The washing machine has detected that the water-level sensing system is not operating correctly.

3C

Drum motor operation fault

The washing machine has detected a problem with drum-motor operation.

4C

Water is not being supplied

The washing machine has not detected the expected water supply.

4C2

Water temperature / cold supply connection check

The washer has detected a water-temperature supply condition, commonly when the cold supply is connected incorrectly.

5C

Water is not draining

The washing machine has not drained water within the expected time.

8C

MEMS vibration sensor fault

The MEMS vibration sensor used for out-of-balance detection is not operating correctly.

AC6

Inverter communication fault

Communication between the main control board and inverter board is abnormal.

dC

Door open or not closed correctly

The washer detects that the main door is open or has not locked correctly.

dC1

Main door lock/unlock fault

The main door locking or unlocking system is not working correctly.

dC3

Add Door lock/unlock fault

The Add Door locking or unlocking mechanism is not operating correctly.

HC

High-temperature heating system fault

The washer has detected a problem in the high-temperature heating system.

LC

Drain hose installation or siphoning fault

Samsung uses LC/LC1/LE/LE1 to indicate that the drain-hose arrangement needs checking.

PC

Clutch position detection fault

The washer cannot correctly detect clutch position or clutch Hall-sensor feedback.

Ub

Unbalanced load prevents spinning

The washing machine has detected an uneven load and cannot spin normally.

UC

Low or irregular supply voltage

The washer has detected interrupted power or abnormal supply voltage.

Ur

Additional rinsing due to load imbalance

The washer has detected an unbalanced condition and is adding rinsing or redistribution behaviour.

CAN'T FIND THE CODE?

Help us add it

Submit a missing Samsung code and we will review it before publishing.

Add missing code